Pergola Builder in Fort Lauderdale
Your backyard should be the best room in the house. We build aluminum pergolas across Fort Lauderdale that hold up to sun, salt, and storm season — and still look good ten years from now.
Why Aluminum Is the Right Choice Here
South Florida is hard on outdoor structures. Wood swells in July, splits by March, and needs sanding and sealing every couple of years. Vinyl chalks and goes brittle under this sun. Neither one belongs within a mile of the Intracoastal.
Aluminum solves all of it. It doesn’t rot, warp, or feed termites. Salt air doesn’t touch a powder-coated finish, which matters if you’re anywhere east of Federal Highway. And because aluminum is strong for its weight, we can span wider openings with fewer posts. You get a more open backyard and fewer things to walk around.
Then there’s the maintenance, or rather the lack of it. Rinse it with a hose twice a year. That’s the whole list. No staining, no repainting, no annual weekend lost to a project you didn’t want.
Structurally, aluminum also gives us room to engineer for wind. That’s not a small thing in Broward County, and we’ll get to it below.
What We Build
Every backyard is different, so we don’t push one product. Here’s what usually makes sense in Fort Lauderdale.
Louvered Pergolas
The louvered roof is the one most people want once they see it work. The blades pivot, so you control the light. Open them wide at four o’clock for shade and airflow. Close them when a storm rolls through and the space stays dry underneath.
Motorized operation is standard on most of our installs. Add rain sensors and the roof closes itself while you’re at work.
Solid-Roof Pergolas and Patio Covers
Sometimes you want shade, full stop. A solid insulated roof cuts the heat coming off the panel and makes the space usable at two in the afternoon in August. These work especially well over an outdoor kitchen, where you’re protecting appliances as well as people.
Attached Pergolas
Attached structures tie into the house and extend your living space off the back door or a slider. They read as part of the home rather than something added later. Most Fort Lauderdale patios are a good fit for this.
Freestanding Pergolas
If you’re covering a pool deck, a seating area, or a corner of the yard away from the house, freestanding is the answer. It also gives us flexibility on placement, since we’re not tied to the existing roofline.
Carports
Plenty of homes here have a driveway and no garage. An aluminum carport keeps the sun off your paint and the rain off your groceries, and it’s built from the same material as everything else we do.
What Building in Fort Lauderdale Actually Involves
This is where local experience earns its keep.
Broward County sits in the High Velocity Hurricane Zone. That means any permanent structure has to meet wind-load requirements written specifically for this part of the state. Engineering isn’t optional and neither is the permit. We handle drawings, submittal, and inspections, so you’re not the one standing in line at the county building.
Setbacks matter too. Lot lines, easements, and pool enclosures all affect where a structure can legally go. We check that before we design anything, not after.
If you’re in a neighborhood with an HOA — much of Coral Ridge, Harbor Beach, and the newer communities west of I-95 — you’ll likely need architectural approval as well. We’ve been through that process many times and can supply the drawings and specs your board will ask for.
We work across the city and the neighborhoods around it: Victoria Park, Rio Vista, Colee Hammock, Las Olas Isles, Coral Ridge, Sailboat Bend, Harbor Beach, Poinsettia Heights, and Wilton Manors. Homes near the water get extra attention on hardware and finish, because salt exposure is real and it shows up first at the fasteners.
How the Project Runs
Nobody likes surprises on a home project, so here’s the sequence.
First, we come out and look. We measure, talk through how you actually use the space, and give you an honest read on what will and won’t work. That visit is free and there’s no pressure attached to it.
Then we design and quote. You’ll see a layout and a fixed price. If the number doesn’t work, we’ll show you where the cost sits and what changes it.
Next comes engineering and permitting. We prepare the drawings and submit to Broward County or the City of Fort Lauderdale, depending on your address. Timelines vary, and we’ll tell you what to expect rather than guessing low.
Installation is usually one to three days once the permit is issued. Our crews clean up daily. We don’t leave a jobsite looking like one.
Finally, inspection closes the permit out. You get documentation for your records, which matters if you sell the house later.
Recent Fort Lauderdale Work
A sleek, modern custom aluminum pergola built for optimal patio shade and coastal durability.
A freestanding poolside aluminum pergola tailored for outdoor dining and weekend entertaining.
An attached solid-roof patio cover engineered with internal drainage for everyday outdoor living.
Client Reviews
Common Questions
How much does a pergola cost in Fort Lauderdale?
It depends on size, roof type, and whether you want motorization. A modest attached aluminum cover sits well below a large motorized louvered structure over a pool deck. We quote a fixed price after we’ve seen the space, so you’re not comparing guesses.
Do I need a permit?
Yes. Any permanent structure in Broward County requires one, and skipping it causes real problems at resale. We handle the whole process.
How long does it take?
Installation runs one to three days for most projects. Permitting is the longer part of the calendar, and it varies by jurisdiction and workload.
Will it survive a hurricane?
Our structures are engineered to Florida Building Code requirements for the High Velocity Hurricane Zone. That’s the standard, and we build to it.
Can you add screens or lighting later?
Yes, and it’s easier if we plan for it now. Tell us at the design stage and we’ll run the wiring and frame for it.