Aluminum Pergola Builder in Coral Springs, FL

We build aluminum pergolas in Coral Springs from our shop on North University Drive. Our team lives and works here. That means we know the permit process, the wind code, and the HOA rules on your street.

Every pergola we install is engineered for Broward County’s High Velocity Hurricane Zone. We handle the permit from application through final inspection.

Google Rating

5.0 stars (15 reviews)

Local Address

3301 N University Dr, Coral Springs

License

Licensed & Insured

Wind Rated

HVHZ engineered

Get a Free Coral Springs Quote | Call (954) 787-7703

Pergola Roof Options We Install in Coral Springs

Coral Springs gets sun most of the year and heavy rain in summer. Your roof choice decides how often you actually use the space. We install three roof systems. Each one solves a different problem.

Four insulated aluminum roof panel samples showing foam cores and powder-coated finishes including white, espresso dark brown, cherry woodgrain, and light oak woodgrain.

Insulated Roof Panels

This is what most Coral Springs homeowners choose. The panel has a foam core bonded between two aluminum skins.
That core blocks radiant heat. The space underneath stays cooler than under a single-skin roof. Rain noise drops to almost nothing.
Insulated panels also span farther than other systems. You get fewer posts and a more open view of the yard.

Louvered Roofs

Louvered roofs use pivoting aluminum blades. You open them for sun and close them for rain.
Motorized versions run on a wall switch or remote. Some close automatically when a rain sensor triggers.
This is the premium option. It costs more than a fixed roof and gives you the most control.

Eco-Friendly and Durable Materials

The classic look. Aluminum beams spaced for partial shade, with no solid roof above.
This option costs the least. It works well over a pool deck or walkway where you want light and airflow.
We can add retractable screens later if you change your mind.

Structural steel rebar grid and wooden framing securing an aluminum pergola post footing engineered for Broward County High Velocity Hurricane Zone wind loads in Coral Springs.

Why Aluminum Beats Wood in South Florida

Wood pergolas fail here. Our humidity, rain, and termites are hard on any timber structure.
Aluminum does not rot. It does not warp. Termites ignore it.
Our frames carry a factory powder-coat finish. That finish resists salt air and UV fading. You wash it with a hose twice a year and that is the entire maintenance schedule.

Built for Broward Wind Code

Broward County sits inside Florida’s High Velocity Hurricane Zone. Structures here face stricter engineering rules than most of the state.
Every pergola we build carries engineering for those loads. We use Florida Product Approval or Miami-Dade NOA components throughout.

Coral Springs Permits and HOA Approval

A pergola in Coral Springs needs a building permit. We pull it for you.

What We Handle

We prepare and submit the full package to the City of Coral Springs Building Division. That includes:

  • Signed and sealed engineering drawings
  • Site plan showing setbacks and lot coverage
  • Product approval documentation for every component
  • Permit application and fees
  • Scheduling for all required inspections

You sign the application. We do the rest.

What You Handle

Most Coral Springs neighborhoods have an HOA. Your HOA approval is separate from the city permit.
Submit your plans to the HOA before we apply to the city. We give you the drawings you need for that submission.

How Long It Takes

  • HOA Review: usually 30 days or based on HOA review dates
  • City permit review: usually 30 days
  • Installation: 1-3 days depending on project
Modern white motorized louvered aluminum pergola attached to a South Florida home patio with integrated LED lighting and outdoor seating.

Coral Springs Neighborhoods We Serve

We install throughout Coral Springs.

  • Heron Bay
  • Eagle Trace
  • Wyndham Lakes
  • The Windings
  • Country Club Village
  • Running Brook Hills
  • Coral Springs Lakes
  • Forest Hills
  • Cypress Run

Nearby Cities

We also build in: Parkland, Coconut Creek, Fort Lauderdale

What Affects the Cost of a Pergola in Coral Springs

We price every project individually. A square-foot number would mislead you. Two pergolas can differ by thousands of dollars. Here is what moves the price.

Span and Structure

Longer spans need heavier beams and larger posts. A 12-foot span and a 20-foot span use different structural members. Your engineer sizes the frame for your actual dimensions. That sizing drives cost more than square footage does.

Roof System

Open-rafter costs the least. Insulated panels cost more and give you heat control, shade, and quiet. Motorized louvered roofs sit at the top of the range. You pay for moving blades, a motor, and controls.

HVHZ Engineering and Product Approval

Broward County sits inside Florida’s High Velocity Hurricane Zone. Every structural component needs Florida Product Approval or a Miami-Dade NOA. Approved components cost more than standard parts. No licensed builder can skip this requirement in Broward.  Your home’s height, roofline, and exposure also change the wind load calculation. Two identical pergolas on different streets can need different engineering. Think about a coastal home, thicker aluminum is require for wind.


Foundation and Site Conditions

Your existing slab may carry the load. It may also need cutting, new footings, or reinforcement. We check this before we quote. Access matters too, since a narrow side gate slows the crew and adds labor hours.

Add-Ons

Retractable screens, ceiling fans, lighting, and electrical runs each add cost. Custom colors outside the standard finish range do the same.

What Your Quote Includes

Every quote covers engineering, permit preparation, materials, and installation. You get one number, and we do not add line items later. We measure your yard, confirm your setbacks, and price the real job. Call (954) 787-7703 for a free on-site estimate.

Frequently Asked Questions

Do I need a permit for a pergola in Coral Springs?

Yes. Coral Springs requires a building permit for pergola projects. We prepare and submit the required permit package for you.

Most installations take 1 to 3 days on site after fabrication. Your timeline depends on the pergola size, roof system, and site conditions.

Yes. We build both attached and freestanding aluminum pergolas. Attached designs include proper flashing details at the roofline to help prevent water intrusion.

Our pergolas are engineered for Broward County’s High Velocity Hurricane Zone. We use applicable Florida Product Approval or Miami-Dade NOA rated components. Final wind resistance depends on the project’s engineering, location, structure, and attachment details.

We provide stamped drawings for your HOA submission. You submit the documents to your association. We handle the city permit process and required inspections.

We offer multiple color and finish options for our aluminum pergola systems. You can choose a finish that fits your home’s exterior and outdoor space. Available colors depend on the pergola style and selected roof system. We will show you the available options during the design process.

Yes. Warranty coverage is available for our aluminum pergola systems. Coverage can vary by the frame, finish, components, and installation. We provide the applicable warranty terms with your project quote. You will know what is covered before work begins.

Get a Free Quote in Coral Springs

Call, stop by the shop, or send us your yard photos.

Broward Aluminum Pergola

3301 N University Dr Coral Springs, FL 33065

Phone

(954) 787-7703

Monday–Friday: 8:00 AM – 6:30 PM

Saturday: 10:00 AM – 4:00 PM
Sunday: Closed

License

Licensed & Insured